- Standalone SATA HDD/SSD eraser, no PC or software required.
The U-Reach TP 1-4 is a portable eraser for erasing and duplicating SATA hard disk drives and SSD's. Due to the compact dimensions, the TP eraser can easily be used at any desired location. Four SATA drives can be simultaneously deleted asynchronously; each SATA port can be individually controlled. The TP 1-4 eraser offers five Erase functions; "Quick Erase", "Full Erase", "Secure Erase", "DoD Erase" and "DoD 7-pass Erase". The DoD Erase function complies with the 5220.22-M US Department of Defense standard.
The U-Reach TP eraser offers a built-in Log Report function. This saves the data of each erased SATA HDD or SSD; duration, Erase mode, result and serial number. The log information can be printed real-time with the optional label printer. The log information can also be exported and saved on a USB stick for use on a PC.
In addition to erasing SATA disks, the U-Reach TP 1-4 eraser can also be used for duplication. The TP can simultaneously make three copies of a SATA hard disk drive or SSD. The TP 1-4 duplicator/eraser offers a maximum speed of 9 GB per minute (150 MB/s) on all channels. The speed does not decrease when multiple hard disk drives are connected. The TP HDD duplicator offers four different copy functions; "Quick Copy", "All Partitions Copy", "Percentage Copy" and "Whole HDD Copy." The Quick Copy function supports the following formats: FAT16/32, exFAT, NTFS, Linux (ext2/ext3/ext4) and Mac (HFS, HFS+, HFSX).
Optional adapters are available for the TP 1-4 SATA eraser/duplicator with which allow different drive interfaces to be connected to the SATA ports of the TP 1-4. Adapters are available for IDE, mSATA, eSATA, iVDR, M.2 (NGFF) and Cfast, among others.
- Standalone SATA HDD / SSD eraser, no PC or software required.
- Portable disk eraser with minimal dimensions for use on every location.
- Simultaneously sanatize multiple SATA disks asynchronously.
- Supports Advanced Format HDD (15 TB+) and GPT, MRB table format.
- Whole HDD Copy supports all formats through bitwise duplication.
- Easy operation with buttons and LCD display.
The U-Reach TP eraser offers a built-in Log Report function which saves the data of each sanitized SATA HDD or SSD (duration, sanitize mode, result and serial number). The log information can be exported to a USB stick for use on a PC.
U-Reach TP erasers are able to simultaneously duplicate at a maximum speed of 9 GB/min to each SATA port. The speed always remains constant, even if the number of media to be duplicated increases.